Telephone: 718-525-4500 or 800-538-2436   |   Fax: 718-481-6470           
Products by Industry
Technical Center
ACRY-PEEL
TECHNICAL DATA

ADHESIVE REMOVER
The fastest acting label adhesive remover available for the video and medical industries


WHAT IT IS:
ACRY-PEEL is mixture of low odor solvents designed to penetrate label surfaces and dissolve any adhesives. ACRY-PEEL evaporates completely, leaves no residue, and saves time.

WHAT IT DOES:
ACRY-PEEL swiftly dissolves label adhesives from acrylics, glass, phenolics, polycarbonates, stainless steel, laminates, and all non porous surfaces without crazing or harming any of the surfaces. ACRY-PEEL allows labels to be peeled cleanly from bare non porous surfaces.

HOW TO USE IT:
ACRY-PEEL can be applied either as a spray or as a wipe:

Spray: Hold spray head approximately " from label and apply with a stroking motion to cover entire area.

Wipe: Use a clean rag saturated with ACRY-PEEL. Gloves are recommended for prolonged use. After ACRY-PEEL is applied, either by spray or wipe, allow 2 minutes for ACRY-PEEL to penetrate through the label surface and on to the adhesive. For baked on labels, removal time should be determined by test. After 2 minutes lift one corner of the label, using a peeling method, until the whole label is removed. Remove any residue with a cloth or paper towel. (Where labels are layered, multiple applications may be needed.)




CAUTION
Combustible - Keep away from heat or flame. Use with adequate ventilation. Avoid breathing vapor or spray mist. Do not get product in eyes or mouth. If product gets in eyes, flush with water.

About Us | Contact Us